Sierra Pacific Windows & Doors

Part Number: 1000 Hoppe Arrone French Casement Hardware Connector Shaft 29.5MM - Lock Latch Shaft Length:  29.5 MM shown in pictures and in stock. 20.5MM 24 MM 20.5mm and 24 mm are NOT STOCKED can have a lead time of 2-3 weeks MM conversion to Inches:  20.5mm which is approximately 13/16 inches long 24mm – approximately 15/16” long 29.5 MM shaft version – shaft is approximately 1 5/32” long  This connector shaft has been known to have been used on Hurd, Sierra Pacific, Marvin and more French Casement Windows. Replacement option for old FUHR hardware that was bought out by Hoppe Bulk Pricing Shown In My Cart: QTY 2-5 10% off QTY 6+ 20% off Part Number: 1000, 3849093 Known To have Been used on Hurd, Sierra Pacific, Marvin, Pozzi and More. Related Parts Sold Separately:  Part Number 1000 - French Casement Connector Shaft FC Adaptor Part Number 1001 - French Casement Handle 33MM (1.5") Shaft  Part Number 1002 - French Casement Mounting Plate Part Number 1003 - French Corner Drive VS S-ES A0055 Part Number 1004 - French Casement Eurogroove Cover, Long Part Number 1005 -  French Casement Eurogroove Cover, Short Part Number 1006 - French Casement Gear S-ES 115/16 2MV FH Part Number 1007 - French Casement FC Linkage Part Number 1008 - French Casement Strike Lead-In S-ES Part Number 1009 - French Casement Strike

Read more less

Part Number: 1001  Hoppe French Casement Hardware Handle 38MM (1.5 inch) Shaft Part Number 1001 has been known to have been used on Hurd, Sierra Pacific, Marvin and more French Casement Windows. Replacement option for old FUHR hardware that was bought out by Hoppe Color In stock #37 White is the only color we stock. We would consider it a construction handle as the white finish is not very nice. Has bumps and not smooth. All other colors are Special Order items: Rustic Umber - also called Oil Rubbed Bronze FB by Hurd and Sierra Pacific. FB finish which means means its a stable finish and NOT a living finish that will change over time.  Antique Finishes from HOPPE North America deliver the unique aesthetic of an aged finish for the discerning hardware connoisseur. Intended to simulate the natural and inconsistent qualities that come with tarnish and age, Antique Brass and Antique Nickel finishes are the result of carefully handcrafted process that have been thoroughly refined. Antique Brass and Antique Nickel finishes by HOPPE will maintain their original appearance and are not considered “living” finishes. These finishes feature coatings that protect each surface from tarnish.  When considering Antique Finishes, the user should be aware these finishes will exhibit variation in color and shade just as an actual tarnished piece of brass or nickel would show. Curved and shaped surfaces will show greater contrast and highlights of golden brass or shiny nickel as shown above. Slight variations can also be expected from one piece to the next. HOPPE maintains a careful balance of consistency blended with purposeful variation to yield the desirable aesthetic of an Antique Finish. The result is a unique hardware piece created with an artisan’s touch. If more consistent appearance is desired, HOPPE recommends Polished Brass (F71, F77-R) in place of Antique Brass and Satin Nickel (F42, F42-R) in place of Antique Nickel. All other colors are special order items NO returns, exchanges or cancellations. We DO NOT stock them. Customers please expect  a 3-6 week lead time All color finishes  are very nice and that is why the price is so much more (except for the #37 White as already noted)  Related Parts Sold Separately:  Part Number 1000 - French Casement Connector Shaft FC Adaptor Part Number 1001 - French Casement Handle 33MM (1.5") Shaft  Part Number 1002 - French Casement Mounting Plate Part Number 1003 - French Corner Drive VS S-ES A0055 Part Number 1004 - French Casement Eurogroove Cover, Long Part Number 1005 -  French Casement Eurogroove Cover, Short Part Number 1006 - French Casement Gear S-ES 115/16 2MV FH Part Number 1007 - French Casement FC Linkage Part Number 1008 - French Casement Strike Lead-In S-ES Part Number 1009 - French Casement Strike

Read more less

Part Number: 1002 Hoppe French Casement Hardware Mounting Plate Related Parts Sold Separately:  Part Number 1000 - French Casement Connector Shaft FC Adaptor Part Number 1001 - French Casement Handle 33MM (1.5") Shaft  Part Number 1002 - French Casement Mounting Plate Part Number 1003 - French Corner Drive VS S-ES A0055 Part Number 1004 - French Casement Eurogroove Cover, Long Part Number 1005 -  French Casement Eurogroove Cover, Short Part Number 1006 - French Casement Gear S-ES 115/16 2MV FH Part Number 1007 - French Casement FC Linkage Part Number 1008 - French Casement Strike Lead-In S-ES Part Number 1009 - French Casement Strike Known Part Numbers: 1002, 8780111

Read more less

Part Number 1003 Hoppe French Casement Hardware Corner Drive VS S-ES A0055 #1003 is the Mushroom Cam Version  Stamped Part: SA IS, 313 and 11 21 Known Part Numbers: 1003, 40005318

Read more less

Part Number: 102 Amesbury Truth Maxim Casement DLX Split Arm / Dyad Operator 102 maxim series has been discontinued. Once stock is depleted the direct replacement will be 147 Encore Series. When you order 147 Encore  - You will need to purchase the cover and handle kit part number 137 sold separately. The Maxim Series Dyad Operator is designed for narrow windows, but will operate a frame width from 16” to 32”; height up to 72” and a sash weight of up to 55 lbs. Replacement Parts for: Hurd, Marvin, Cascade, Bilt Best, Milgard, Sierra Pacific, Allsco and more. Known Part Number: 102, 45352, Truth, 50-50-32-011, 50-50-24-011, 50-50-32-012, 50-50-24-012 To Order Direct Replacement Encore Style 147:  Part Number 147 Encore Dyad Operator Part Number: 137 Encore Folding Handle and Cover Kit Instructions on How To Replace Operator Click On Blog Link Associated Parts Sold Separately for Part Number 102 Maxim DLX Style  P# 131 (Folding Handle)  P# 177 (Non Folding Handle).   If you are not sure you can e-mail us a picture of your existing operator. Please read our Parts Identification Instruction page and then e-mail your pictures to: info@windowpartscenter.com

Read more less

Part Number: 103 Casement Wood Bottom Sill Cover Used On Hurd Casement and Awning Windows 7' PC - Pine - Current Style - Can be used to retro fit on Old style Hurd Casements - Customer may have to plane down or shim up depending on vintage.For old style with bottom groove for weather strip- customer will have to cut in groove for weather strip. Dimensions are: 7' L x 1 7/8 W (or Depth) x 13/16 H (front Face of sill cover) For  8' long please e-mail. for quote

Read more less

Part Number 113 Sash Keeper Lock Amesbury Truth*****Keepers ARE handed****** To determine if you have a left or right hand keeper: Looking from the inside at your window if the lock is on the LEFT hand side you need a LEFT hand keeper and if your lock is on the RIGHT hand side you need a RIGHT hand keeper.Colors: come in beige and black. Black is on old color. once our black stock is gone beige will automatically be shipped out in its place. Used on multiple window brands that use Amesbury Truth Hardware. Hurd, sierra pacific and more  

Read more less

Part Number  114 Sash track for casement window. Track Only (Sliding track shoe p/n 189 not included) Color: Beige (Replaces Black) May receive beige or black depending on stock. Dimensions: 14 1/2" Long X 14/16" Wide X 19/32" Tall Amesbury Truth 11576.XX #8 x 1 Flat Heat Sheet Metal Screw recommended by manufacturer (not included)  Related Products Sold Separately:  Part # 101 - Amesbury Truth Maxim DLX Sill Mount Casement Dual Arm Operator Part # 187 - Sash Bracket with Set Ring  - elbow arm of #101 operator snaps onto Part # 189 - Track Shoe – what the long arm of the #101 operator snaps onto Part # 121 - Adjustable Hinge – below the operator on the bottom and on top of the window when you open it. Part # 119 - Newer Encore Operators are a direct replacement/upgrade for these. See part number 119

Read more less

Part Number: 117 Operator for Casement  Window Entrygard Truth 15 Series  Straight Arm 15.94 . Handing: Left Hand and Right Hand. See pictures that are labeled to determine your handing of your operator  Overall arm length 9 1/2 inch see Pictures  Known Part Numbers: 117 - U.S. Pat. 4,241,541 - CAN Pat. 350,432 - PAT 1982 Know Numbers Stamped on Housing and Gear: U.S. Pat. 4,241,541 - CAN Pat. 350,432 - PAT 1982, PAT.NO. 4,840,075, 45275, 31782L Handle and Cover Sold Separately See part # 139 for handle and #166 and #S1004 for cover. Known Replacement Parts for: Hurd, Marvin, Cascade, Caradco, BiltBest, Milgard, Sierra Pacific, Norco and more. Truth Factory Cut Sheet for 15 Series Streight Arm 15.49 Operator  

Read more less

Part # 119 Casement Operator  - Encore Dual Arm Sill Mount Amesbury Truth 50.10  119 is the Operator Only - You will need to purchase the cover and handle kit part number 137 sold separately. Manufacture Details: Encore Operators give you all the strength and performance characteristics of Maxim, but with the flexibility of a snap-fit cover and streamlined full-flip folding handle that eliminates collapse during operation. Encore Operators require 33% less effort to operate than previous operators and are designed to use the same mounting location as the Maxim system. Stainless steel components are available for coastal applications. These operators complement the Encore Multi-Point Locking System.  Finish Arms available in: Standard E-Gard Beige (stock) and Stainless Steel (Non stock)* *Non stock items are special order and can have a 2-6 week lead time. orders can not be cancelled or returned.  Associated Parts Sold Separately:  Part Number: 137 Encore Folding Handle and Cover Kit Part # 187 - Sash Bracket with Set Ring  - elbow arm of #101 operator snaps onto Part # 189 - Track Shoe – what the long arm of the #101 operator snaps onto Part # 114 - Sash Track (what the track shoe #189 slides into) Part # 121 - Adjustable Hinge – below the operator on the bottom and on top of the window when you open it. Known to have been used on the following Manufacturing Brands:  Hurd, Semco, Marvin, Cascade,  BiltBest, Milgard, Sierra Pacific Monarch April 2006 to present  and more.   Manufacture Tech Note: Proper Installation of an Operator Cover & Nested Folding Handle. When installing the cover and handle on the operator you should follow theseinstructions:• Snap the cover onto the operator base.• Place the handle onto the spline of the operator and rotate the handle to closethe window.• Lock the window in place.• Rotate the handle Ľ turn back (towards opening direction) to reduce thepressure on the operator.• If the handle needs to be positioned in a nested cover you can remove thehandle at this time and re-position it so that it will rest correctly in the nestedcover.• Tighten the set screw on the handle.• Unlock the window and cycle the sash open and closed until the handle returnsto the starting position whereby there is no additional torque required to close the sash. Note: the sash should travel to a point that the lock can easily engageand seal the window.• If the window does not come all the way into the closed position, and more forceis required on the operator to close the window, you will need to review thewindow for the following; sash sag; racked window; lock points that are notproperly aligned; or hinges not installed correctly. These issues should becorrected prior to repeating the installation of the handle onto the operatorspline.Placing the operator and the handle under high stress and abusive loads can causepermanent failures to the handle or operator as the window is repeatedly opened andclosed. Known Part Numbers: 119, 096357, 096358, 36-368EN, 36-369-EN updated 7/8/23

Read more less

Part Number: 121 Amesbury Truth Adjustable Casement and Awning Hinge Track Kit Stack Hight: 7/16" (see picture)  What's included: 1 left hand hinge track with hinge arm, 1 right hand hinge track with hinge arm (universal for both left and right handed casement Windows - hinges are used on the top and bottom of the casement window swap which one goes in top and bottom depending on how your window is handed).  Size: 10 inch, 14 inch (determine your size by measuring the track).  Finish: Standard (beige E-Guard powder coat shown in pictures), Stainless Steel Hinge track kits are adjustable. To order adjustable wrench see part # 190 (sold separately). Only one wrench is needed for multiple hingesAdjustable hinges help with sash dragging. When you adjust the bottom hinge toward the locking side it raises up the lock side sash up. If it makes it worse adjust the other way. If you have the old style hinges with the metal clip you MUST also replace the track, which comes in the kit, as the new style hinge arms do not have a metal clip to hold it to the track. They now have a set ring on the track to hold everything in place. Old style hinges with clip are no longer available.  Known Part Numbers: 121, 30451, 30144, 30350, 20681, 30463, 31512, 31532, 14-77-00-009, 14-77-00-010 Associated Parts Sold Separately: part number 190: Hinge Adjustment Wrench 

Read more less

Part Number: 130 Amesbury Truth BACKPLATE LINK ASSEMBLY (11645.92) (part of Mirage Concealed Multi point Locking System) *Screws not included number stamped on back of part : 31830 Associated Parts Sold Separately: 129 Mirage Lock and Escutcheon 198 Tie Bar Window Locking Mechanism. 128 Bug Guard Pack (For Lock)

Read more less