Swinging Patio Door Parts

Part Number 825 Hoppe Single Point Gear Box as shown in pictures and in product video **** 825 Single point gear box is not interchangeable with multi point gear box system interior components are different see video**** In stock: Only part # 825-D which has a 1 3/4" Backset and 1" Dead Bolt Throw Special Order: All other part numbers are special order items (no returns or order cancellations) and can have a 1-4 week lead time once you place your order.   Strike is reversible for both left hand and right hand doors (see video below or revering latch instructions)  Install Instructions: Remove set screws on handle levers and remove Remove mounting screws on faceplate estuation of the handle set On side of door remove screw that lines up with the lock cylinder. Remove the handle set Remove all screws down the side of the door that holds on the gear box (keep all screws you will reuse them) Install new multipoint with screws Test for Operation  Reinstall handle set Test for proper operation

Read more less

Part Number: S4005, S4006, S4007 and S4008 Dual Adjustable Swinging Door Hinge - Horizontal a d Vertical Adjustment  Some hinge options have been discontinued by manufacture so we have combined the four part numbers on one product page to make it easier for you to see what is available. If a color you want says "unavailable" try changing the Style or Material selection.  Color/Finish: Black, Oil Rubbed Bronze, Satin Nickel, Bright Brass (not all colors are available  in all styles or materials).  Discontinued Colors: Craftsman Bronze Removable Pin (Use Oil Rubbed Bronze Removable Pin or Craftsman Bronze Non Removable Pin as the replacement) Style:  NON Removable Pin (NRP)- Suggested Use Outswing Door and Inswing door Removable Pin - Suggested Use Inswing door Only Material: Steel And Brass Condition: New Handing: Non Handed (works on both RH and LH doors) Screws: Screws Not Included Stamped on back of hinges: WWW.AMESBURY.COM/PATENTS FEATURES AND BENEFITS ’ Both Vertically and Horizontally Adjustable. Horizontal Adjustment ± .156 Vertical Adjustment ± .200 ’ Vertical Adjustment in Each Hinge Allows for Heavier Panels. ’ Adjusts with a Standard #2 Square Drive. Square Drive Prevents Stripping Over Phillips or Slotted. ’ Secure Out-Swing Non-Removable Pin Hinges  ’ Fits Common Fabrication within the Industry. Pro Tip: Remove weight from the hinges by lifting up on the door before you adjust.  Known Part Number: HG210 HG200 Pat. Nr. 8,429,794, HG200-B-90, HG200-B-91 Associated Replacement Parts: Part Number S4301 Hinge Cap updated 7/8/23

Read more less

Part Number: SP15489Replacement Style Weather Strip for Swinging Door Hydrosill Weather StripLength:  77 inch  Bulb Diameter: 1/4 inchColor: Black Sold in: Packs (Example: if you order a 4 pack you will get QTY 4 lengths of the SP15489 77 inch Long each)Shipped: Straight In Box Sample: about 4-5" long Known Part Number: SP15489, PIQ007BZ007. Known to be used on Sierra Pacific Swinging Patio Doors, Park-Vue, PVH10, SWVIQS3 Schlegel Amesbury 5000, 2500 and 2200 hydro series threshold  and other door brands. , 

Read more less

Part Number: S3002 Drip cap for door bottom  - Door Bottom Shoe with Rain Drip 2 1/4 inch S3002 Door Bottom Shoe with S3003 Sweep Dimension: 2 1/4 inch width x 15/16 inch tall x Length  Size: 36 inch long or 48 inch long Shoe Color: Bronze Sweep Color: Gray or Black depending on what manufacturer availability  Limited Stock Item. Can have a lead time of 4-5 weeks if not in stock. Associated Parts: Part number: S3003 Sweep Only is also sold separately as replacement  

Read more less

Part Number 810  Pin/Roller and Flipper/Tongue Style Hoppe Multi point for Hurd Swinging Patio Doors only! (If your door is another door brand please email us and we can email you a worksheet you ok will need to fill out to get you the correct Hoppe multipoint for your door. info@windowpartscenter.com) Brass color no longer manufactured - only comes in stainless steel for both the gear box and the extensions.  Comes with: bottom extension with gear box attached and the top extension (choose your door height size). The Hoppe #810 Roller style is the direct replacement for old FUHR Roller Multi point that was on Hurd doors – no modification is needed when changing to the Hoppe #810. The only difference is some of the FUHR multi point had an automatic fire to engage the multi point, the Hoppe does not. So with the Hoppe to engage the multi point you close the door then lift up on the door handle then throw the dead bolt to lock. Hoppe Roller Style will also replace the Old FUHR Roller style. Top Extension: Comes in Door Heights: Retro/6-8, 6-10, 7-2, 8-0. This usually ships via UPS Ground. Style Options: Hoppe Gear Box Pin/Roller Style Hoppe Gear Box Flipper/Tongue Style Hurd Door Panel Heights for Top Extension:77" = Retro/6-878" = Retro/6-880" = 6-1084" = 7-293" = 8-0For Classic Hurd Doors Manufactured from 2005 and PriorFuhr Multi point used on Classic Hurd doors are no longer manufactured - Hoppe Multi point is the direct replacementNumber Known To Have Been On Older Gear Box (Hoppe Roller Style Brass Color): 1334291 - this is a component number.  Install Instructions (also see instructions in pictures): Remove set screws on handle levers and remove remove three mounting screws on faceplate estuation  On side of door remove screw that lines up with the lock cylinder. Remove the handle set Remove all screws down the side of the door that holds on the multipoint system (keep all screws you will reuse them) Install new multipoint with screws Test for Operation  Reinstall handle set Test for proper operation

Read more less

Part Number: S4112 W&F Multipoint Mortise Lock  2-3/8IN BACKSET For 6 Inch handle  Used On: MULTIPOINT MORTISE LOCK2-3/8IN BACKSET 6IN HANDLETO CYLINDER PEACHTREECITADEL IPD AND CITATION high performance stamped on side of mortise lock box. U.S. PATENT NO’S 5,290,077 5,388,875 Color: Older ones are a gold color where the current version is more green. Green is a direct replacement for the gold.  Non handed - See how to video below. the mortise is reversible for your door handing and also has a interior plastic release. To reverse the lock direction - remove the side plastic covers and swamping the internal cams - side to side. The lock bolt can also be reversed by extend the bolt and slide off the bolt base. This center mortise lock rotates 50 degrees to retract the bolt. The mortise lock works with all handle sets designed for this lock system [1993-2002]. Replacement handle bushing kit [SKU 56-115] and Auxiliary Lock module springs are recommended parts when replacing the center lock mortise. DO NOT TAKE APART THE MORTSE LOCK BOX OR REMOVE ANY SCREWS- THERE ARE NO REPLACEABLE PARTS INSIDE THIS LOCK BOX. ANY ALTERATION OR DISASSEMBLY OF THIS LOCK WILL VOID ANY RETURN POLICY. ALL MORTSE LOCKS ARE CHECKED FOR FUNCTION PRIOR TO SHIPMENT. Associated Parts Sold Separately: S4112TK - Alignment Key Tool - System Rod Timing Key D301 W&F Trilennium multipoint 6 Inch CTC Replacement Handle Set S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation W&F S4115 Peachtree W&F Peachtree Citadel Swing Patio Door Multipoint Lock  

Read more less

Part Number: S4109 GU Handle Set Screw 5M x 6 You will get 2 screws per pack 1 pack = 2 screws     

Read more less

#813 - Hoppe 3Pt Convert Auto Release Striker - Bright Brass   Replacement Parts for Hoppe Multipoint Hardware used on swinging patio doors May have minor scuffs, etc these come this way from the factory not considered a defect.  Known To have Been Used On: Hurd, Weather Sheild, Hoppe, Marvin BiltBest and many other door brands that used Hoppe Multi Point Hardware  Sold Separately Are Part Numbers:     #833 - Hoppe 3Pt Convertible Under plate #834 - Hoppe 3Pt Striker For Rollers - Auto

Read more less

Part Number 840-016 Replacement Amesbury Truth GU Door Handle Spindle  Spindle made of zinc - can have a sliver or brass look to it. #11 In Drawing Dimensions: 5/16 inch × 5/16 inch x 4 1/8 inch (8mm x 8mm x 130 mm) On Swinging Patio Door Hurd GU handle sets and many other manufacturing brands that use GU handles, truth handles, Hurd Bulk Pricing Shown In My Cart: QTY 2-9 30% QTY 10+ 40% Associated parts Sold Separately:  Part Number: S4109 - 5M x 6 Set Screw (GU)  Part number: 840-031 - 1/4-20 and 6M Set Screws (GU and Hoppe) Part Number: S3004 - 6M x 12 MM 304SS Set Screws (Hoppe)

Read more less

Part Number: 835 4" x 4" Ashland Horizontal Guide Hinge Adjusting Swinging Patio Door Hinge PIVOT TRUE V400 4" ADJUSTABLE HORIZONTAL DOOR HINGES Handing: Non Handed remove the pin and flip to reverse handing see video below. For the Mate Vertical Hinge see part number 836   Low Stocked Item - May have a 2-3 week lead time KEY FEATURES Seamlessly retrofits a 4" X 4" one-step pocket route with 5/8" corner radius Hex head adjustment screws, not Phillips or Slotted, to provide secure tool engagement and prevent stripping during adjustment Screw hole locations optimized away from panel edge to prevent accidental wood splitting Panel leaf incorporates a unique shield to keep out debris and provide a premium appearance in the closed position Incorporates Teflon filled bushings for increased wear resistance Non-removable pin (NRP) option available for secure out-swing applications PERFORMANCE AND OPERATION Adjusts 1/4" vertically and 3/16" horizontally Easily reversible for either left or right-hand hinge applications Innovative, patent-pending adjustment mechanism achieves extremely low adjustment torque with a standard 3/32" hex wrench Exceeds BHMA - grade 3 standards for wood, vinyl, aluminum and steel doors. Known Brands: Ashland, Hurd Energy Saver Patio Door, Sierra Pacific WI Patio Door Screw Pack: Screws are sold separately and not all colors are available. To order Screws with your hinges see 835/836Screw Pack (1 screw pack will do 1 hinge). Or you can buy at your local hardware store the following: QTY 4 - #9 x ¾” or 1” (size change depends on what finish the screw is available in) QTY 4 - #9 x 1-1/2” QTY 1 - #9 x 2 ½” or 3” (size change depends on what finish the screw is available in Associated product Sold Separately: Part Number 836 Set Hinge Screw Pack 835/836Screw Pack IF THIS HINGE DOES NOT LOOK EXACTLY LIKE YOUR ADJUSTABLE HINGE. CLICK HERE TO SEE ALL THE ADJUSTABLE HINGES WE HAVE ON OUR WEBSITE TO ORDER. IF YOU ARE NOT FINDING YOUR HINGE PLEASE EMAIL OR TEXT OUR RESEARCH DEPARTMENT AND WE WOULD BE HAPPY TO ASSIST YOU. How To Remove Hinge Pin Video:

Read more less

Part Number 808 Frame Weather Strip for In Swinging Patio DoorsUsed on Side and Head Frame of Hurd In swinging French Patio DoorsComes in 4', 8' rolled  3 or 4 Q-lon per door are required if you want to replace all of this type of weather strip on your door:For a Single door you need QTY 3: QTY 2 at 8' pc for the sides and QTY 1 at 4' pc for the head.For a French door then you need QTY 2 at 8' pc for the sides and QTY 1 at 8' pc for the head and QTY 1 at 8' pc for the astragal in the middle. Customer will have to cut weather strip to length they need if they have a smaller door than 4' wide or 8' Tall ***SHIPPING NOTE***Product is shipped rolled in a box. If you want product shipped straight in a long box please email info@windowpartscetner.com for quote. (4 foot and 8 foot only we will not quote or ship out 12 foot pcs straight). 

Read more less

Part Number 855 Single Point GU Gear Box Hardware*  Schlosskasten Security / Schlossk. Sec. *Single point gear box  is not interchangeable with multi point gear box system interior components are different. For Swinging Patio Doors Depending on vintage your sticker label color can be orange or white with the following numbers:  Orange Label:  6-29377-45-0-1 A  45-92-8 or 45-92-8 EINST. White Label:  6-29377-45-0-1 B  Scholssk.Sec.U 45/92/8 Strike is reversible for both left hand and right hand doors. Brands known to been used on: GU, Hurd, Sierra Pacific and More. Install Instructions: Remove set screws on handle levers and remove Remove mounting screws on faceplate estuation of the handle set On side of door remove screw that lines up with the lock cylinder. Remove the handle set Remove all screws down the side of the door that holds on the gear box (keep all screws you will reuse them) Install new multipoint with screws Test for Operation  Reinstall handle set Test for proper operation *Single point gear box  is not interchangeable with multi point gear box system interior components are different. updated 7/18/23

Read more less