H3 Windows Replacement Parts and Hardware

part number: 406 For Hurd Monument Horizontal Slider Windows sold by the foot, and 50 foot rolls no returns on orders less than 50 feet. Returns for full uncut 50 foot rolls only. 

Read more less

Part Number: 328 CDH Pivot Pin for Concealed Jamb-liner Sold individually  CDH Pivot PinConcealed Jamb Liner for Double Hung Windows.

Read more less

Part Number 207 Amesbury Truth Encore Awning Sill Mount Operator. Replacement awning window operator 207 is the Operator Only - You will need to purchase the cover and handle kit part number 137 sold separately. Color: E-Guard or Stailless Steel (this refers to the arms of the operator)  Manufacture Details: Encore Operators give you all the strength and performance characteristics of Maxim, but with the flexibility of a snap-fit cover and streamlined full-flip folding handle that eliminates collapse during operation. Encore Operators require 33% less effort to operate than previous operators and are designed to use the same mounting location as the Maxim system. Stainless steel components are available for coastal applications. These operators complement the Encore Multi-Point Locking System. Recommended Screws: (Qty 6) 8 X 1 Flat Head Sheet Metal Screw  (Qty 2)Rear Mount:#8-32 X 3/8 Pan Head Machine Screw  Number Known to be stamped on back of arms: 41013 and 41016 Stamped on Back Side of Housing: Made In U.S.A Associated Parts Sold Separately:  Part Number: 137 Encore Folding Handle and Cover Kit Part Number: 718 - Amesbury Truth Awning Guide Bar Part Number: 213 Black Slider Shoe  Part Number: 212 Black Operator Retainer Clip updated 7/7/23

Read more less

Part number: 708Tilt Pivot Pin sold individually (Use #7 x 5/8" Screws - Not included) Replacement Pivot Pin for H3 Double Hung Windows

Read more less

Part Number: 836  4" x 4" Ashland Vertical  Set Hinge Adjusting Swinging Patio Door Hinge PIVOT TRUE V400 4" VERTICAL ADJUSTABLE DOOR HINGES For Mate Horizontal Hinge See Part Number 835  Low Stocked Item - May have a 2-3 week lead time Handing: Non Handed - see video below. Remove pin and flip to reverse handing KEY FEATURES Seamlessly retrofits a 4" X 4" one-step pocket route with 5/8" corner radius Hex head adjustment screws, not Phillips or Slotted, to provide secure tool engagement and prevent stripping during adjustment Screw hole locations optimized away from panel edge to prevent accidental wood splitting Panel leaf incorporates a unique shield to keep out debris and provide a premium appearance in the closed position Incorporates Teflon filled bushings for increased wear resistance Non-removable pin (NRP) option available for secure out-swing applications PERFORMANCE AND OPERATION Adjusts 1/4" vertically and 3/16" horizontally Easily reversible for either left or right-hand hinge applications Innovative, patent-pending adjustment mechanism achieves extremely low adjustment torque with a standard 3/32" hex wrench Exceeds BHMA - grade 3 standards for wood, vinyl, aluminum and steel doors. Known Brands: Ashland, Hurd Energy Saver Patio Door, Sierra Pacific WI Patio Door Screw Pack: Screws are sold separately and not all colors are available. To order Screws with your hinges see 835/836Screw Pack (1 screw pack will do 1 hinge). Or you can buy at your local hardware store the following: QTY 4 - #9 x ¾” or 1” (size change depends on what finish the screw is available in) QTY 4 - #9 x 1-1/2” QTY 1 - #9 x 2 ½” or 3” (size change depends on what finish the screw is available in Associated Product Sold Separately:  Part Number 835 Guide Hinge Part Number 835/836 Screw Pack IF THIS HINGE DOES NOT LOOK EXACTLY LIKE YOUR ADJUSTABLE HINGE. CLICK HERE TO SEE ALL THE ADJUSTABLE HINGES WE HAVE ON OUR WEBSITE TO ORDER. IF YOU ARE NOT FINDING YOUR HINGE PLEASE EMAIL OR TEXT OUR RESEARCH DEPARTMENT AND WE WOULD BE HAPPY TO ASSIST YOU. How To Remove Pin

Read more less

Part Number: 147 Amesbury Truth Encore Sill Mount Casement Operator - Reverse Dyad Arm style 50.60 The Encore series Dyad operator is designed for narrow windows and will operate sash size form 16" to 32" Wide , up to 72" Height and weighing up to 55 lbs.  Handing Left Or Right - View pictures above, video and pro tip below to determine that handing you need to order.  147 is the Operator Only read pro tip below - You will need to purchase the cover and handle kit part number 137 sold separately. Pro Tip: Please note these operators are used on narrow windows and are called reverse dyad. So it’s going to seem confusing but for example if your operator is a right hand operator it will will need a left hand cover and handle kit. Handing designation is determined by the manufacturer see Amesbury Truths product tips in pictures. As well as video below.  Manufacture Details: Encore Operators give you all the strength and performance characteristics of Maxim, but with the flexibility of a snap-fit cover and streamlined full-flip folding handle that eliminates collapse during operation. Encore Operators require 33% less effort to operate than previous operators and are designed to use the same mounting location as the Maxim system. Stainless steel components are available for coastal applications. These operators complement the Encore Multi-Point Locking System. Recommended Screws: (Qty 6)  8 X 1 Flat Head Sheet Metal Screw (Qty 2)For Rear Mount: #8-32 X 3/8 Pan Head Machine Screw Associated Parts Sold Separately:  Part Number: 137 Encore Folding Handle and Cover Kit Video to Determine Handing for Part Number 147 Operator and 137 Cover and Handle Sold Separately:   Video On How To Install Casement Operator:  Manufacture Tech Note: Proper Installation of an Operator Cover & Nested Folding Handle. When installing the cover and handle on the operator you should follow theseinstructions:• Snap the cover onto the operator base.• Place the handle onto the spline of the operator and rotate the handle to closethe window.• Lock the window in place.• Rotate the handle Ľ turn back (towards opening direction) to reduce thepressure on the operator.• If the handle needs to be positioned in a nested cover you can remove thehandle at this time and re-position it so that it will rest correctly in the nestedcover.• Tighten the set screw on the handle.• Unlock the window and cycle the sash open and closed until the handle returnsto the starting position whereby there is no additional torque required to close the sash. Note: the sash should travel to a point that the lock can easily engageand seal the window.• If the window does not come all the way into the closed position, and more forceis required on the operator to close the window, you will need to review thewindow for the following; sash sag; racked window; lock points that are notproperly aligned; or hinges not installed correctly. These issues should becorrected prior to repeating the installation of the handle onto the operatorspline.Placing the operator and the handle under high stress and abusive loads can causepermanent failures to the handle or operator as the window is repeatedly opened andclosed. Known to be used on Hurd Windows narrow Casements  9/19/05 to Present, Anderson Windows 100 Series and many other window brands Known part number: 147, 36-371EN, 36-372EN

Read more less

Part Number 187 Amesbury Truth Sash Bracket with Set Ring SNAP ON STUD TYPE BRACKET (see video) Style: Left hand or Right hand (see pictures to determine handing) Material: Standard and Stainless Steel (Stainless Steel not a stock item specials order no returns) Random color shipped - black or beige.New Style Sash Bracket for with Set Ring: For Truth DLX Maxim and Encore Operators.On DLX Maxim Operators Sash Bracket was black as shown in picture. On Encore Operators  sash bracket was beige. Both colors are exactly the same and interchangeable Used on Hurd Windows From 02/02/98 - Present. And many other window brands that use Amesbury Truth Parts  Related Products Sold Separately:  Part # 101 - Amesbury Truth Maxim DLX Sill Mount Casement Dual Arm Operator Part # 189 - Track Shoe – what the long arm of the #101 operator snaps onto Part # 114 - Sash Track (what the track shoe #189 slides into) Part # 121 - Adjustable Hinge – below the operator on the bottom and on top of the window when you open it. Part # 119 - Newer Encore Operators are a direct replacement/upgrade for these. See part number 119 Known Part Number: 10680.92, 12510.92,10681.92, 12511.92   

Read more less

Part Number: 710 710 current style. See pictures and directs on how to replace. Snap On Balance Shoe kit for Concealed Jamb liner  Style: 710 Current Style - comes with new rivet pin as 710 is longer and mounts in the 2nd old of your balance bar. If you do not have the rivet installation tool you will also need to order it. Part Number: Coming Soon is Sold Separately  (see guide replacement instructions) Uses on H3 Double Hungs and Hurd Energy Server Concealed Jamb Liner Double hung and Single Hung Windows.327 Old Style Over All Dimension NLA: 1 15/16" L x 19/32" W x 11/16" D Associated Products Sold Separately:  Part Number S2021 - Rivet Setting Tool Part Number S2022 - Sash Balance Guide Rivets  

Read more less

Part Number: 716 - Tie Bar Lock Actuator Linkage For Awning and Casement H3 Tie Bar Lock Actuator Linkage for Awning and Casement WindowsThis lock linkage goes with part # 715 Tie Bar Assemblies Awning and Casement WindowsFinish: E-Gard Beige. Stainless Steel available for Special Order Please Call or E-mail R&R for Pricing.This tie bar lock actuator linkage work on Hurd and Sierra Pacific Hurd Brand Awning and Casement Windows as well as other window brands. Known Part Number Stamped On Back Of Black Part: 40960 CAV  Associated parts Sold Separately:  129 Amesbury Truth Mirage Lever Lock & Escutcheon Kit Part Number 715 Tie Bar

Read more less

Part Number  114 Sash track for casement window. Track Only (Sliding track shoe p/n 189 not included) Color: Beige (Replaces Black) May receive beige or black depending on stock. Dimensions: 14 1/2" Long X 14/16" Wide X 19/32" Tall Amesbury Truth 11576.XX #8 x 1 Flat Heat Sheet Metal Screw recommended by manufacturer (not included)  Related Products Sold Separately:  Part # 101 - Amesbury Truth Maxim DLX Sill Mount Casement Dual Arm Operator Part # 187 - Sash Bracket with Set Ring  - elbow arm of #101 operator snaps onto Part # 189 - Track Shoe – what the long arm of the #101 operator snaps onto Part # 121 - Adjustable Hinge – below the operator on the bottom and on top of the window when you open it. Part # 119 - Newer Encore Operators are a direct replacement/upgrade for these. See part number 119

Read more less

This block and tackle balance is used on Hurd Energy Saver Concealed Jamb Liner Double Hung / Single Hung and H3 Lines.Also used on other manufacturers windows - customer will have identify and match up picture. To order block and tackle balance: See number stamped on side of metal and match it up to the options.Due to the multiple sizes available these are not a stock item and have a 3 week lead time. Special order item NO returns. You will receive once balance system. if you need to replace both the left and right side on one window order QTY 2.

Read more less

Kit Includes: 1 Lock, 1 Keeper, 4 screws  Locks are Handed.If you window only has 1 lock then it is a Left Hand.If window has 2 locks then it has a Left Hand and a Right Hand***Left Hand and Right Hand Locks are sold separately - See picture for handing Goldtone has been discontinued by manufacturer. Once stock is depleted Champagne will be shipped out in its place. Number that can be stamped on the back of the lock: 32782Numbers that can be stamped on the back of the keeper: 677147  

Read more less