Item# 606

Product Description


OSI® TeQ::Foam™ is a single component, minimal expansion and low pressure polyurethane foam packaged in a pressurized metal container. It is specifically designed for use with the WINTeQ™ Window Installation System. It is dispensed in bead form for sealing gaps and cracks, holes and voids around windows and doors, in most types of construction projects. The product exhibits slight to moderate expansion during application and cures upon reaction with moisture to form a flexible, urethane foam. The closed cell structure of this material provides an R factor of 5 per inch of cured foam making it an efficient method for stopping air and moisture infiltration and expensive warm and cold air loss between windows and rough frame. TeQ::Foam™ is a low pressure, minimal expansion foam that will not warp or deform windows and doors. TeQ::Foam™ adheres to all types of building materials including wood, concrete, and drywall and is compatible with asphalt and butyl flexible flashing. TeQ::Foam™ complies with all Federal and State VOC regulations.


TeQ::Foam™ is part of the WINTeQ™ Window Installation System and is used to insulate and seal around windows and door frames. It can also be used for jambs, mud sills, header joints, corner joints, top plate penetrations, electrical and plumbing penetrations and other areas where air infiltration or heat loss may occur.


�� TeQ::Foam™ is not a fire stopping material and SHOULD NOT be used in areas that require fireproof or fire stopping materials

�� Urethane foams are adversely affected by sunlight (Ultraviolet light). Exposed foam must be coated with a protective coating.


Third Party Certification…………GreenGuard® Certified for Children and Schools

Low foam pressure / expansion……Will not warp or deform windows and doors

Quick setting formulation........Can be cut or trimmed in less than 1 hour

Closed cell foam structure…...Will not absorb moisture; Provides an R factor of 5 per inch of cured foam

Remains flexible……Will not crack out over time

Part of a complete Window Installation System……WINTeQ™ is the first complete & fully compatible window installation system


A ¼” (6.3 mm) bead size will deliver approximately 5912 ft. (1801 m) of foam. A 3/8” (9.6 mm) bead size will deliver approximately 2626 ft. (800 m) of foam. A ½” (12.7 mm) bead size will deliver approximately 1477 ft. (450 m) of foam. Please note: Yields shown are based on theoretical calculations, for comparison purposes, and will vary depending on ambient conditions and particular application.

Size: 22.25 oz.

Packaging: Pressurized Metal Can

***this product will ship ONLY UPS Ground****